# Human supervision (HS)

> What the HS switch in Operation does, when to leave it on and when to turn it off.

## What it is

**SH** (Human Supervision) is a toggle switch located on the **Operation** bar, alongside other controls on that screen. It is **enabled** by default and applies to all operation modes.
This setting is specific to the individual device; changing it does not affect other units. Only an Administrator can modify this setting. It is the same option as "Detect photos and screens" found under **Settings → Recognition** (enabling one automatically disables the other).

## Enabled: Someone is monitoring the operation

Use this setting when a person is actively monitoring the operation (e.g., at a reception desk, service counter, or access control point).

- The app does not check whether a detected face is a photo or a screen.
- It recognizes more registered individuals and does not display "possible photo" alerts.
- The person supervising the operation is responsible for spotting if someone presents a photo, a mobile phone, or another screen in front of the camera.

## Disabled: The operation runs without human oversight

Use this setting when there may be times when no one is actively monitoring the operation while it is running.

- The app performs an additional check to determine whether each detected face is a photo or a screen.
- While this provides greater security in the absence of supervision, some legitimate registered individuals may be flagged as a "possible photo," resulting in a lower recognition rate.

## Changing the setting

1. Open **Operation**.
2. Locate the **SH** toggle switch on the Operation bar.
3. To disable it, tap the switch and confirm your choice in the prompt that appears.
4. To re-enable it, simply tap the switch again.

## Measured results

Internal testing in hiClient shows the following accuracy thresholds.

Percentage of registered individuals recognized upon passing:

| Mode | SH Enabled | SH Disabled |
|---|---|---|
| Access Control | 98.0% | 87.7% |
| Attendance | 98.0% | 87.8% |
| Registration (records created in this mode) | 80.8% | 73.4% |

- With SH enabled, recognition rates increase by approximately 10 percentage points for Control and Attendance, and by about 7 percentage points for Registration.
- In both cases, no unregistered individuals were incorrectly accepted as registered, and 98.1% of unregistered individuals triggered an alert. 
This remains unchanged when SH is enabled.
- With SH disabled, approximately 14.6% of instances involving actual registered individuals are flagged as a "possible photo."

When SH is enabled, detecting such attempts becomes the responsibility of the
supervisor. If the operation is to function with intermittent supervision, disable SH.

As previously stated, hiClient utilizes machine learning models with known error rates. The company recommends that a human supervisor oversee the operation at all times and advises against delegating decisions regarding individuals to automated systems. You are solely responsible for any decisions made as a result.

- [Managing access](https://docs.hi-client.com/desktop/access.md?lang=en)
- [Facial recognition: accuracy and requirements](https://docs.hi-client.com/desktop/recognition.md?lang=en)
