Skip to content
Docs
hi-client.com (opens in a new tab)

Connect an EZVIZ camera

Download

Enable local RTSP video in EZVIZ and add the camera to hiClient for Windows.

Seeing video in the EZVIZ app does not mean the camera has enabled the local video service hiClient needs. Enable RTSP in EZVIZ first, then add the camera to the hiClient desktop app.

Before you start

Connect the PC, camera and phone to the same local network, outside the guest network. You need access to the camera in EZVIZ and an administrator account in hiClient. Option names may vary by EZVIZ version and model; this procedure worked with a C6N (CS-C6N-B0-1G2WF).

Enable RTSP in EZVIZ

  1. Connect your phone to Wi-Fi on the same network as the camera.
  2. Open EZVIZ and go to Profile → Settings → LAN Live View.
  3. Tap Start Scanning and select the camera; you do not need to know its IP address beforehand.
  4. If prompted for local access, use admin and the camera verification code, unless you changed those credentials.
  5. Open the gear icon → Local Server Settings and enable RTSP.
  6. Note the camera's local IP address so you can identify it in hiClient.

Add the camera to hiClient for Windows

  1. Open the hiClient desktop app as an administrator and go to Settings → Cameras.
  2. Click Find cameras.
  3. Select the camera by its IP address and click Add selected.
  4. Choose EZVIZ and the direct RTSP connection, check the address, and enter the local username and password or verification code.
  5. Click Diagnose to find the video path, review the result, and use Test settings before saving.
  6. Select the saved camera in Operation and check its image before using it for access.

Enabling RTSP in EZVIZ does not automatically add the camera to hiClient: you must also complete these desktop steps.

If it does not appear

  • Check that RTSP is still enabled and that the devices share the same LAN without client isolation.
  • If you know the IP address, use Add manually, select EZVIZ and direct RTSP, and enter the IP address and port 554; complete credentials and diagnosis before saving.
  • Adding the camera manually does not fix disabled RTSP.
  • If your app has no RTSP option, check model and firmware compatibility with EZVIZ.
  • If it stops working after restarting the router, check whether its IP address changed and update it in hiClient.

References

* Unencrypted RTSP, usually on port 554, can allow someone able to intercept network traffic to view the video and, depending on the authentication used, capture credentials. Use it only on a trusted network and do not open or forward that port to the Internet.